Firstly, Put the power on,open the key switch on the control panel,then press start the oil pump, so that you will hear pump rotation. ( this machine does not work ).

Secondly, the shear plate material must to note is the gap adjustment, generally located on the side of the machine, according to the board material12% ~ 15% to adjust the clearance, clearance numerical scale plate can be read. ( such as shear10mm sheet, the distance can be adjusted for0.12mm )

Thirdly, the backgauge adjustment generally have electric rapid adjustment and manual fine-tuning, you can start with electric regulation is the approximate size position with manual fine-tuning to you need to cut.

At last, the foot switch is depressed, until the sheet metal shear segment released, otherwise midway loosen up automatically.