Paramtents
function for metal sheet straightening
drive motor
certificate CE
place of origin ShenZhen, GuangDong, China
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Model | STL-100 | STL-200 | STL-300 | STL-400 |
Max. material thickness | 100mm | 200mm | 300mm | 400mm |
Material thickness | 0.15-0.6mm | |||
Straightening speed | 16m/min | |||
Motor | 1HP×4P | 2HP×4P | 2HP×4P | 3HP×4P |
Section roller diameter | Φ20mm | |||
Section roller quantity | 3/3(up/down) | |||
Size | 0.7*1.0*1.4m3 | 0.8*1.0*1.4m3 | 0.9*1.0*1.4m3 | 1.0*1.0*1.4m3 |
Weight | 150kg | 200kg | 250kg | 300kg |
1. This is a special designed straightener for plane materials that need high precision punching treatment. As we all know,
coil material can not produce good products without flattening and stress relieving treatments; therefore, the performance of
the straightener is critical in the production process.
2. Since the curvature of each point is different, it’s difficult to reach high precision straightening requirement by only
rectifying roll laying. STL adopts rough straightening for the wide rows, precise straightening for narrow rows and diverse
laying principle. The rough straightening brings the material the same bend arcs, then use the precise straightening to
meet the customer punching requirement.
3. The flattening and the straightening secondary wheels adopt the imported SUJ2, milling after HRC60°heat treatment
and starts production after plating the hard chrome to ensure evenness of the chrome layers and the form tolerances of each
bearing.
4. The rough and precise adjusting adopts the floating four-point balancing equipment, with the dial indicator which can
find leveling point rapidly.
5. Adopts the cardan joint and the gear transmission, suitable for straightening high precision requirement products.
6. Adopts the high precision axis, and the additional lubrication system prolongs machine life span.
7. Each straightening wheel of the S series precision straightener adopts the flatting satellite wheel to prevent the distortion
in the manufacturing process from happening, which improved the products flatness quality.
8. With the fixed top and bottom secondary roller enhanced the top and bottom wheel rigidity and prevent it distorts.
9. Due to the differences of the material quality, width and thickness, there are no fixed values as the preferences;
therefore, taking some materials for pilot run before the mass production and start the continuous assembly after it
reaches the standard.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.