Paramtents
function cut metal sheet strip
purpose get metal sheet plates
Brand Name LIHAO MACHINE
manufacturer not trading company
good design ful automatic
Packging & Delivery
Min Order1 piece
Briefing
Detailed
I.Introduction
Cut to length line, is an automatic transversal cutting production line, for cutting metal sheet stirp.
Cut to length line, can uncoil metal sheet strip coil, then straighten metal sheet strip,
then feed metal sheet strip forth to shearing machine, then shearing machine cut metal sheet strip transversely, in order to get required length metal sheet plates.
II.Technical paramter
Model | Coil Maximum Width (mm) | Sheet | Sheet Plate Length | Coil | Floor Area (m) |
LH-CTL-650 | 100-620 | 0.3-3mm | >300 | 1-5 | 2×15 |
LH-CTL-850 | 200-800 | 0.3-3mm | >500 | 1-5 | 2.5×15 |
LH-CTL-1300 | 300-1250 | 0.3-3mm | >550 | 1-15 | 4×18 |
LH-CTL-1500 | 600-1500 | 0.3-3mm | >500 | 1-15 | 5×20 |
LH-CTL-1600 | 600-1600 | 0.3-3mm | >500 | 1-20 | 7×20 |
LH-CTL-1800 | 800-1750 | 0.3-3mm | >500 | 1-25 | 8×22 |
III.Main equipment or device of cut to length line
1.Coil car
2.Uncoiler
3.Straightener
4.Supporting device
5.NC servo roll feeder
6.Shearing machine
7.Conveyor feeder
8.Stacking machine
9.Loader
10.Lifter
11.Electrical control system
12.Oil hydraulic system
13.Pneumatic control system
14.Etc
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.