Paramtents
Condition New
After-sales Service Overseas commissioning is available
Line Speed 0-200m/min
Threading speed 15m/min
Coil Thickness 0.3-5.0mm
Coil Width 800-2100mm
Coil Weight 25Ton
PLC Mitsubishi
HMI Weinview
Eletronic Component Schneider
Packging & Delivery
Min Order1 set
Briefing
Detailed
Trimming Line
I. General Introduction
1. Trimming line is used to coil’s decoiling, edge trimming, leveling, and rewinding, which mainly consist of decoiler, edge trimming shear and recoiler, etc.
2. Material thickness: 0.3-5.0mm
3. Line speed: 200m/min
II. Mechanical performance
1.Strength limit: αb =8-45kg/mm²
2.Yield limit: αa =3-33kg/mm²
III. Layout drawing
IV. Specifications
Model | Raw Material | THK (mm) | Width (mm) | ID (mm) | OD (mm) | Weight (T) | Speed (m/min) | Threading speed (m/miin) | working height (mm) | Line direction | Hydraulic pressure (Mpa) | Pneumaticpressure (Mpa) |
5.0x2100 | steel and steel alloy material | 0.3-5.0 | 800-2100 | Φ508/610 | ≤Φ2000 | ≤25 | ≤200 | ≤15 | 1000 | left → right | 10 | 0.5 |
PS:All above specifications only for reference, also can customize as your request. |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.